Where are the Venetian plaster?
Its popularity is a classic Venetian plaster acquired already during the Renaissance. Birthplace of unique wall covering is considered ancient Rome.
She decorated the homes of wealthy nobles, (a) the composition and the process of its creation wizards kept in the strictest confidence. They turned out beautiful cover, externally simulating marble, Jasper, Onyx, Malachite and granite.
The surface of walls can be, as Matt, and glossy. Coating is strong enough. There are samples of walls, preserved since the middle ages, proving this fact.
Composition of Venetian plaster
The main components are the Venetian plaster: slaked lime (or acrylic basis) Stone dust and pigments. All the same components, that have been used for many centuries ago. And except for the plaster is applied by a special layer of natural beeswax.
Council! The smaller the particles the consistency, order smoother wall.
Venetian plaster application technology
At the outset, prepares the surface for Venetian plaster. It should be perfectly smooth. For this purpose do grid reinforcement, and then her shpatljujut. Surface dries up, and then primed. This is required for reliable adhesion between plaster and ground, as well as to avoid cracking.
Using a special trowel applied a thin layer of plaster. But there are some features, require skills. The mixture is covered in a special way and involves a multistage sequence. Creates special translucent layers, which can be from 3 before 10. Each of them very carefully smoothed down, aligned, pressed.
Venetian plaster is applied strokes (spots), uneven, (chaotically) dry on wet method. Each layer provides additional shades. Note some nuances: at the beginning and at the end of the process, When the strokes are made, you need to loosen the pressure.
And remember, the wall surface needs to be divided into plots (0,5 -1 m) and consistently do the following steps:
(a)) apply strokes (Optionally, different shades);
b) all level and smooth;
in) polished surface (After full drying wax and only with a soft cloth).
When you go from one place to another, When levelling and polishing, should cling to the previous boundaries of the plot.
Venetian plaster slowly created with his own hands, as a work of art. Venetian plaster is appreciated for light. It forms a glowing from the inside out effect. This is achieved thanks to the layers. Impression through upper cover polished, and especially when you hit on him the rays of the Sun or artificial light sources.
The color gives the added pigment. Look good shades of a single color with different tonality, When each layer differs from the previous (slightly lighter or darker). Complete drying surface occurs in a week.
Types of Venetian plaster
The most common type of Venetian plaster is imitation marble (Classic). However, there may be variations with glitter silver, Gold, mother of Pearl, Jasper, Malachite, Granite.
There are following kinds of Venetian plaster:
• Veneto (Vèneto)
• Trevignano (Trevignano)
• Marebello (Marbello)
• Ènsausto (Encausto)
Veneto (Vèneto) -the most common classical Venetian plaster, with the effect of frosted polished marble. Different advantageous cost. It is easy to damage and not exacting to the conditions of care and maintenance.
Trevignano(Trevignano) -decorative coating on the wall looks, as if lighted from the inside, in the manner of the marble wall mirror. The main difference is translucency layers and lots of colors, that give this unique effect. Resembles rock travertine. This plaster looks fine in the refined classics, Baroque and vintage, that complement the aristocratic frescoes.
Marebello (Marbello) -decorative plaster effect roughly processed marble. When different lighting expands unexpected color game. Visually it is perceived, as velvety with polished glossy streaks. It is ideal for rooms with high humidity.
Ènsausto (Encausto) -semipolished surface of walls interspersed with superficially resembles granite.
The main advantages of Venetian plaster
1. After application of the topcoat (wax) material becomes waterproofed.
2. Ecologically pure, safe and fire.
3. For such a surface is easy to care for. Can be washed with soapy water or just water, but without solvents.
4. Long shelf life: It can be from five to ten years.
5. Decorative faux Venetian plaster in the Interior creates an amazing effect, It is similar to the marble with a matte or glossy surface.
6. No odour.
Disadvantages of a Venetian
1. Disadvantages include high cost.
2. Careful preparation of the process and ideally smooth surface.
3. Venetian plaster coating refers to a complex of performance, and for this painstaking process requires highly qualified specialists. One square meter master spends five times more time, compared to usual plaster drawing.
Council! Venetian plaster can be used as a basis for panels, murals. So, the space will look more grandly. Special atmosphere appears in the Interior. There is an assumption, that Raphael used Venetian plaster, as a basis for painting walls.
In the style of Venetian plaster is appropriate?
Venetian plaster can transform any space, make it into a royal residence. It not only looks great on a wall, but also on the ceiling or in the niches.
Venetian plaster harmoniously in classic and vintage interiors, as well as perfect fit in Baroque, Rococo, Empire. Plaster with reflective surface is a great option for the Interior in the style of Art Deco. Venetian plaster makes it possible to create the spirit of the European middle ages in space.
Like Venetian plaster for versatility. If you want, it's easy to apply in any home and style. She appeared often in contemporary styles, for example, high-tech. Only in this case the basis chosen pastel or matte white surface.